Motion Pro Micro Bleeder WP 4860 MXMA, 4CS (08-110080)

Specifications:

• For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1) as well as the WP 4CS fork.
• Also for use on all 1999 and later WP 43/WP 48 fork caps (P/N's 4860.0074S and 4860.0075S) with external spring preload adjustment.
• These fork caps require a 4-pin spanner (MP P/N 08-0290) to remove the fork cap.
• New ultra-compact, low profile design is only 11mm high installed.
• Stainless steel body is stronger and will not corrode.
• Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder.
• Reduces harshness caused by air build-up.
• Allows bleeding of air pressure without tools.
• One of the easiest bolt-on upgrades you can make to your forks.
• Kit includes two bleeder valves.

Bike Fitment:

• KTM 65 SX 2007-2017
• KTM 125 SX 2002-2016
• KTM 144 SX 2007-2008
• KTM 150 SX 2009-2013
• KTM 250 EXC 2007-2017
• KTM 250 EXC-F 2008-2016
• KTM 250 SX 2002-2016
• KTM 250 SX-F 2007-2016
• KTM 250 XC-F 2014-2016
• KTM 300 EXC 2008-2017
• KTM 300 EXC-E 2007-2010
• KTM 300 XC-W 2013-2017
• KTM 350 EXC-F 2012-2016
• KTM 350 SX-F 2011-2016
• KTM 350 XC-F 2012-2016
• KTM 450 EXC 2013-2016
• KTM 450 SX-F 2013-2016
• KTM 500 EXC 2012-2016
• Husqvarna TC 65 2017
• Husqvarna TC 125 2014-2015
• Husqvarna TE 250 2014-2015
• Husqvarna TE 300 2014-2015
• Husqvarna FC 250 2014-2016
• Husqvarna FC 350 2014-2016
• Husqvarna FC 450 2014-2016
• Husqvarna FE 250 2014-2017
• Husqvarna FE 350 2014-2017
• Husqvarna FE 450 2014-2016
• Husqvarna FE 501 2014-2017
• Husqvarna TXC 449 2011
• Husaberg FE 250 2013-2014
• Husaberg FE 350 2013-2014
• Husaberg FE 390 2010-2012
• Husaberg FE 450 2007-2011 / 2014
• Husaberg FE 501 2013-2014
• Husaberg FE 550 2007-2008
• Husaberg FE 570 2009-2011
• Husaberg FE 650 2007-2008
• Husaberg FS 450 2008
• Husaberg FS 570 2010
• Husaberg FS 650 2007-2008
• Husaberg FX 450 2010
• Husaberg TE 250 2013-2014
• Husaberg TE 300 2013-2014